How to Calculate the PNLRate
In Futures trading, unrealized PNL and realized PNL can be confusing. Why does the profit and loss displayed while holding a position differ from the actual PNL after closing it? This article uses simple formulas and examples to help clarify the difference between the two.1. Difference Between Unrealized and Realized PNL1.1 Basic DefinitionThe key difference between unrealized and realized PNL lies in whether the position has been closed.Unrealized PNL: This refers to the profit or loss of an open position, which fluctuates in real time with market price changes. On MEXC, unrealized PNL is calculated by default using the fair price. Users can choose the pricing basis for unrealized PNL within their current position settings.Realized PNL: The actual profit or loss generated after a position is closed. This includes all realized PNL from the position, covering trading fees, funding fees, and the closing PNL. The closing PNL is calculated based on the market price matched by the system at the time of closing.Note: The fair price is calculated based on a combination of the index price and market price, and it may differ from the last price of the contract. This discrepancy is one of the factors that can cause differences between unrealized PNL and realized PNL.1.2 Calculation Formula ComparisonPosition TypeUnrealized PNL Calculation FormulaRealized PNL Calculation FormulaLong(Fair Price − Avg Entry Price) x Position x Size(Avg Close Price − Avg Entry Price) x Position x SizeShort(Avg Entry Price − Fair Price) x Position x Size(Avg Entry Price − Avg Close Price) x Position x Size1.3 ExampleWhy does the profit decrease after closing a position? Let's look at an example using USDT-M ETHUSDT Futures. While holding the position:After closing the position:Position information:Trading pair: ETHUSDT (Long position: bullish on ETH)Avg entry price: 2721.18 USDTFair price: 2723.92 USDTAvg close price: 2722.91 USDTPosition size: 50 cont. (1 cont. = 0.01 ETH)Opening fee: −0.2722 USDTClosing fee: −0.2722 USDTUnrealized PNL = (Fair Price − Avg Entry Price) x Position x Size = (2723.92 − 2721.18) x 50 x 0.01 = 1.37 USDTCurrent Unrealized Profit = 1.37 USDTRealized PNL = (Avg Close Price − Avg Entry Price) x Position x Size − Trading Fees − Funding Fees = (2722.91 − 2721.18) x 50 x 0.01 − (0.2722 + 0.2722) − 0 = 0.3206 USDTActual Profit = 0.3206 USDT1.4 Why is PNL Different Before and After Closing a Position?The following reasons may cause unrealizedPNL and realized PNL to differ:Reason 1: When the fair price deviates from the market price, it causes unrealized and realized PNL to differ.Unrealized PNL is calculated based on the fair price by default, while realized PNL is based on the actual matched market price. Large market fluctuations may cause differences between these prices, resulting in discrepancies between unrealized and realized PNL.Reason 2: Deduction of trading fees and funding fees.Closing a position deducts fees, so actual realized PNL after fees may differ from unrealized PNL. If the position is held across funding fee periods, funding costs may also apply.Note: If the funding rate is positive, longs pay funding fees to shorts; if negative, shorts pay longs.Reason 3: Real-time price fluctuations.Cryptocurrency prices depend heavily on user trading behaviors. Large buy or sell orders can cause sharp, short-term market price swings. These swings may cause the PNL shown while holding the position to differ from the actual PNL after closing.Reminder:The fair price mechanism reduces the impact of market manipulation, but the actual realized PNL depends on the market price when the order is matched.In Futures trading, unrealized losses may trigger liquidation, so controlling position risk is crucial.2. How to Calculate the PNLRate2.1 Calculation FormulaIn Futures trading, the PNL rate is a key metric to measure trade performance:PNL Rate = (PNL / Initial margin) x 100%Initial Margin = (Avg Entry Price x Contracts x Size) / LeverageROI = Unrealized PNL / Initial marginThe ROI only depends on current leverage, not on margin increases or decreases.2.2 ExamplePosition Information Trading pair: ETHUSDT (Long position – bullish on ETH)Leverage: 500xDirection: Long (bullish)Entry price: 2697.30 USDTReal-time fair price: 2703.67 USDTPosition size: 50 cont. (1 cont. = 0.01 ETH)Trading fee = 0.2697 USDTFunding fee = 0 USDTInitial Margin = (Avg Entry Price x Contracts x Size) / Leverage = (2697.30 x 50 x 0.01) / 500 = 2.6973 USDTPNL= Unrealized PNL − Trading fees − Funding Fees = 3.185 − 0.2697 − 0 = 2.9153 USDTPNL Rate = (PNL / Initial Margin) x 100% = (2.9153 / 2.6973) x 100% = 108%Recommended reading:MEXC Futures Now Support Order History and Capital Flow Exports to PDFMEXC Futures Loss Coverage FAQMEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit ExplainedMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesGuide to Futures Bonus, Position Airdrops, and Fee Vouchers
MEXC Futures Now Support Order History and Capital Flow Exports to PDF
1. What is a Futures Order?A futures order is an order created by a user on a centralized exchange, containing the rules and conditions for a trade. These rules and conditions can include the currency pair to be traded, the quantity to be traded, the price, order type (market order, limit order, etc.), and validity period.When a user submits a cryptocurrency futures order, the exchange executes corresponding actions based on the order's rules and conditions. If the order meets market conditions and there are sufficient counterparties to match it, the trade will be executed, and assets from both the buyer and seller will be transferred according to the agreement.2. How to Export Futures Order History and Capital Flow PDFs You can use the PDF export feature for order history and capital flow of futures order on both the Web and App versions.2.1 Website Open the MEXC official website and log in to your account. Then, in the top navigation bar on the homepage, select [Futures Orders] under [Orders] to access the corresponding page.On the futures order page, select [Order History] then click [Export Order History] to bring up the export order history window.You can choose the futures trading pair, direction, and time period you want to export. Select the export format as [PDF], and after setting up, click [Export] to complete the PDF version export of order history information. Once the settings are complete, click [Export] to finish exporting the order history in PDF format. Note that it may take some time to complete the PDF export. If the data exceeds 10,000 entries, the bulk data export method will be applied.Within the chosen time frame for export, if you select [Last 180 days] or [Last 360 days], a message will appear indicating that bulk data export allows you to export data from any 360-day period within the recent 18 months (up until yesterday). You can export up to 100,000 records at once, with a maximum of 10 downloads per month.Similarly, select [Capital Flow], then click [Export Fund Flow] to open the export fund flow window.After configuring the futures trading pair, crypto, fund type, fund flow type, and time period you wish to export, choose [PDF] as the export format. Click [Export] to complete the export of fund flow information. Note that it may take some time to complete the PDF export. If the data exceeds 10,000 entries, the bulk data export method will be applied.Within the chosen time frame for export, if you select [Last 180 days] or [Last 360 days], a message will appear indicating that bulk data export allows you to export data from any 360-day period within the recent 18 months (up until yesterday). You can export up to 100,000 records at once, with a maximum of 10 downloads per month.2.2 AppOpen the MEXC App and log in to your account. Tap the user icon in the upper left corner, then tap [Transactions] and select [Futures Orders].On the Futures Orders page, select [Order History], tap the export button in the upper right corner, and tap [+ Export New] to open the new export window.You can set the time period, trading pair, and trading direction. Currently, only data for limit orders can be exported. Once the settings are complete, click [Generate] to export your order history.If you do not select "Email me once generated" during export, you will receive an email or SMS. Please follow the instructions in the email or SMS and visit the corresponding page to download the records, which will be valid for 7 days.You can also click [Email Me] after the export is complete, then go to your email inbox to download and view the records.On the app, you can export data from any 360-day period within the recent 18 months (up until yesterday). You can export up to 100,000 records at once, with a maximum of 10 downloads per month.Recommended reading:MEXC Futures Loss Coverage FAQMEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit ExplainedMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesGuide to Futures Bonus, Position Airdrops, and Fee VouchersUsing Spot and Flexible Savings Assets to Open Futures Positions FAQ
Guide to Futures Bonus, Position Airdrops, and Fee Vouchers
1. Futures Bonus Usage Instructions1.1 Futures bonus rules1) Futures bonuses can only be used for Futures trading (including regular trading, copy trading, and grid trading). Profits generated from the bonus are withdrawable, but the bonus itself is non-withdrawable and will be automatically revoked upon expiration.2) Futures bonuses may be used to offset trading fees, funding fees, and realized losses. They can also be used as margin for trading when the account's USDT balance is insufficient.Note: Because Futures bonuses are used first to cover deductions such as trading fees, funding fees, and realized losses, when an account holds both USDT and Futures bonuses, USDT will be used first as margin for opening positions. This helps prevent a reduction in margin caused by the automatic deduction of Futures bonuses, which could otherwise increase the risk of liquidation.3) Bonus deductions will appear in your transaction history. Fees, losses, and funding fees may be consolidated into a single bonus entry.Example 1: If you have 5 USDT in Futures bonus and incur a 2.5 USDT loss plus 0.03 USDT in closing fees, your history will show a bonus deduction of 2.53 USDT.Example 2: If you have 2 USDT in Futures bonus and incur a 2.5 USDT loss plus 0.03 USDT in closing fees, your history will show a bonus deduction of –2 USDT.4) Any withdrawal of assets from your Futures Wallet before your Futures bonus is fully used will immediately forfeit all remaining bonus.5) Trading fees covered by Futures bonuses are not eligible for commission rebates.6) Futures bonuses can only be used for USDT-M Futures and are not supported for USDC-M, USD1-M, or Coin-M Futures.1.2 How to View Your Futures BonusCheck the Futures bonus balance: The Futures bonus will be credited to your Futures Wallet.Open and log in to your MEXC App. On the Wallets tab, tap Futures, and under Assets List, below USDT you can view your Futures Bonus balance.Futures Bonus Usage Details:1) Open and log in to the MEXC App; tap the profile avatar in the top-left corner.2) Select Transactions.3) Select Futures Orders.4) Select Capital Flow. Then, under Filters, select Bonus, and tap Confirm to view the bonus usage details.2. Position Airdrop Usage Instructions2.1 How to Claim a Position Airdrop1) Specially invited users can participate by visiting the event landing page to claim rewards, or by tapping on in-App pop-ups.2) Participate in events such as the Get $10,000 event to claim your position airdrop rewards.Note: For certain events, eligibility is evaluated daily based on user criteria. If you do not meet the conditions on the day you attempt to claim, the reward may not be granted.2.2 How to Participate in the Position Airdrop EventOnce you successfully claim a position airdrop reward, you will receive an email with the details. The leverage, position value, and trading pair may vary.Please note:Position airdrop voucher: You can open the position manually and choose whether to go long or short. Position airdrop: The system randomly assigns a long or short position, and you cannot change it. Whether you can choose the position direction depends on the reward type and the applicable event rules.2.3 How to View Your Claimed PositionAfter successfully claiming the position, you can immediately go to the Futures trading page to view the position.2.4 How to Use Your Claimed Airdrop PositionYou can increase your position airdrop to amplify profits, set take-profit and stop-loss orders, or fully close the position. After closing, any profit earned is withdrawable, but the remaining margin will be automatically revoked and cannot be withdrawn or reused.If your airdropped position incurs a loss (without any added margin), your maximum loss is limited to the airdropped funds; your other assets remain unaffected.3. Fee Voucher Usage Instructions3.1 Fee Voucher Rules1) Fee vouchers can only offset Futures trading fees; they cannot serve as margin and are non-withdrawable. Expired Fee vouchers are automatically reclaimed.2) Fee vouchers apply automatically when fees are incurred; no manual selection is required.3) Fee vouchers have the highest priority in fee deductions. Deduction order: Vouchers > Bonuses > MX deductions.4) A Fee voucher can only be applied if its value covers the full trading fee. Partial deductions on trading fees are not supported.5) Trading fees offset by Fee vouchers are not eligible for commission rebates.6) Fee vouchers cannot be used for USDC-M, USD1-M, or Coin-M Futures.Recommended Reading:MEXC Futures Loss Coverage FAQUsing Spot and Flexible Savings Assets to Open Futures Positions FAQMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesMEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit Explained
How to Open Futures Positions Using Spot and Flexible Savings Assets
1. Opening Futures Positions Using Spot and Flexible Savings AssetsWhen opening a Futures position, this feature allows users to automatically use assets from their Spot account or Flexible Savings account as margin if the available balance in the Futures account is insufficient. This allows the system to meet the margin requirements and place the order to open the position.After this feature is enabled, the system will automatically perform actions such as Flexible Savings redemption and asset transfers during order placement, without requiring manual action from the user. This greatly simplifies fund allocation. For users who are used to keeping funds in Spot accounts or Flexible Savings to earn returns, this feature allows them to keep funds flexibly allocated while still responding quickly to Futures trading opportunities.At present, only assets staked in Flexible Savings are supported for opening Futures positions on the web platform. Support for using Spot assets to open Futures positions, as well as support on the mobile app, will be launched soon.2. Requirements for Using Spot and Flexible Savings Assets to Open Futures PositionsBefore using this feature, please make sure the following conditions are met:Your Spot account or Flexible Savings account holds available assets.On the Futures trading page, you manually select the available accounts under Available.Please note that this feature is not supported in multi-asset margin mode. Planned orders and trailing stop orders also do not support opening Futures positions using Spot or Flexible Savings assets at this time.3. How to Enable Spot and Flexible Savings Assets for Futures TradingStep 1: Enter the Futures Trading PageLog in to your MEXC account and go to the Futures trading page.Step 2: Find the Available Funds SectionIn the order placement area, find the Available button. This section is used to select which accounts can be used for the current position opening.Step 3: Select the Accounts You Want to UseClick Available to view the selectable options. The Futures account is selected by default. You can also select the Spot account or the Flexible Savings account, or select both at the same time. After selection, assets from these accounts will be included as available funds for opening the position.Step 4: Submit Futures OrderAfter selecting the accounts, enter the price and quantity as usual in the order panel and submit the order. If the Futures account balance is insufficient, the system will automatically use assets from the selected accounts to meet the margin requirements.4. How the Feature Works in Different Situations4.1 When the Futures Account Has Sufficient FundsIf the funds required for the order are less than or equal to the available balance in the Futures account, the system will use the Futures account balance directly to open the position. No redemption or transfer will occur. Even if you have selected the Spot account or Flexible Savings account, the system will always prioritize using funds from the Futures account.4.2 When the Futures Account Has Insufficient FundsIf the funds required for the order exceed the available balance in the Futures account, the system will automatically use assets from the other accounts you selected. The system first calculates the required amount. If the Flexible Savings account is selected, the system will automatically redeem assets. If the Spot account is selected, the system will automatically transfer assets. After the margin requirements are met, the system will continue placing the order to open the position.4.3 ExampleAssume your Futures account has an available balance of 100 USDT, and opening the position requires 150 USDT in margin. If you have selected the Spot account or Flexible Savings account, the system will automatically use 50 USDT from the selected account. After redemption or transfer is completed, the position will be opened.5. Adding Margin to Isolated Positions Using Spot and Flexible Savings AssetsIn addition to opening positions, this feature also supports adding margin to isolated positions. When you need to add margin to an existing position to reduce liquidation risk, you can directly use assets from your Spot account or Flexible Savings account without manually redeeming or transferring assets.To do this, select the isolated position you want to adjust in the order area and click the pencil icon next to Margin. In the Modify Margin window, click Max Addable, select the account to use, enter the amount, and confirm to complete the process.6. NotesWhen using this feature, please note the following: After selecting additional accounts, if the funds required for the order exceed the available balance in the Futures account, the system will automatically perform redemption and transfer actions. Selecting additional accounts does not necessarily increase your available balance immediately. Assets may not meet redemption or transfer conditions, may be subject to limits, or may fail due to system processing issues. This feature only applies to opening positions and adding margin. Liquidation or automatic margin addition for isolated positions will not affect your Spot assets or Flexible Savings assets. If redemption or transfer fails during order placement, the order will fail. Assets will not be automatically returned to the original account, and no re-staking will occur.7. Users Suitable for This FeatureThis feature is particularly suitable for:Users who prefer to keep funds in Spot accounts or Flexible Savings to earn interest, while still being able to open positions quickly when trading opportunities arise.Users who frequently need to add margin to isolated positions and want to reduce manual steps.Users who want to keep funds flexibly allocated and avoid holding large idle balances in the Futures account.Risk Notice: Crypto asset prices are highly volatile. This article is provided for feature usage instructions only and does not constitute any investment advice. Please proceed with caution after fully understanding the risks of Futures trading.Recommended Reading:Using Spot and Flexible Savings Assets to Open Futures Positions FAQMEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit ExplainedUsage Instructions for Futures Bonus, Position Airdrop, and VouchersMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesMEXC Futures Loss Coverage FAQ
MEXC Futures Funding Rate: Calculation Methods and How to View Funding Rates
1. What Is the Funding Rate?The funding rate is a key mechanism in the perpetual futures market that helps keep futures prices aligned with spot prices. Through this mechanism, long and short position holders periodically pay fees to each other at a fixed rate. MEXC does not charge any fees for funding payments.Positive funding rate: Long position holders pay funding fees to short position holdersNegative funding rate: Short position holders pay funding fees to long position holdersThe funding fee is calculated as follows: Funding Fee = Position Value × Funding RateNote that funding fee deductions may affect your liquidation price and final PNL. Funding settlement times vary by trading pair. Please refer to the information displayed on the official MEXC website for the exact schedule.2. Why Do Perpetual Futures Require a Funding Rate Mechanism?The funding rate exists due to dynamic changes in market supply and demand. When a large number of traders hold positions in the same direction, futures prices may deviate from the underlying spot index price, potentially causing abnormal market fluctuations.The funding rate mechanism uses economic incentives to guide trader behavior, encouraging futures prices to realign with the underlying asset price. This mechanism effectively prevents excessive price deviations and reduces the risk of market manipulation. For experienced traders, funding rates can also present additional profit opportunities.3. How to Check the Current Funding Rate on MEXC?On the MEXC Futures trading page, you can directly view the current funding rate and the funding countdown for each Futures trading pair. As funding rates differ across trading pairs, simply switch between pairs to check the relevant information.*BTN-Open Futures Trading&BTNURL=https://www.mexc.com/futures/BTC_USDT* 4. Detailed Funding Fee Calculation MethodsMEXC supports two Futures modes, each with a slightly different funding fee calculation method.4.1 Funding Fee Calculation for Stablecoin-Margined Futures Funding Fee = Position Value × Funding Rate
Position Value = Position Size (crypto quantity) × Fair PriceExample: Assume Trader A holds a long position of 10 BTC in BTCUSDT Perpetual Futures. The current fair price is 10,000 USDT, and the funding rate is 0.01%.Position value = 10 × 10,000 = 100,000 USDTFunding fee = 100,000 × 0.01% = 10 USDTSince the funding rate is positive, Trader A (the long position holder) must pay 10 USDT, while short position holders with the same position size will receive 10 USDT.4.2 Coin-Margined Futures Funding Fee CalculationFunding Fee = Position Value × Funding Rate
Position Value = Position Size (Cont) × Contract Value / Fair PriceExample: Assume Trader A holds 100 cont. of BTCUSD long position, with each cont. having a value of $100. The current fair price is 10,000 USDT, and the funding rate is 0.01%.Position value = 100 × 100 / 10,000 = 1 BTCFunding fee = 1 BTC × 0.01% = 0.0001 BTCSince the funding rate is positive, Trader A must pay 0.0001 BTC, while the corresponding short position holders will receive 0.0001 BTC.5. Funding Settlement Time and Fee RulesFunding fees are generally settled every 8 hours, at 00:00, 08:00, and 16:00 (UTC). Only users who hold open positions at the settlement time are required to pay or receive funding fees. Positions closed before the settlement time will not incur any funding fees. The entire process is fully automated, with funding fees directly exchanged between Futures position holders.Please note:1. Funding fee settlement may be delayed by up to 15 seconds due to batch processing. Positions opened shortly after the settlement time, such as 08:00:05 (UTC), may still be included in the current settlement, whether the trader pays or receives the fee.2. Funding fee settlement times may vary by Futures trading pair. Please refer to the product page for details.*BTN-View Funding Rates&BTNURL=https://www.mexc.com/futures/information/funding_list* 6. How to Check Paid or Received Funding Fee Records?Web: Go to theOrders page and select Funding Fees to view detailed records.App: Tap Profile Icon → Transactions → Futures Orders → Capital Flow, then use Filter to select Funding Feeand tap Confirm to view the records.7. How to View Historical Funding Rate Data?Web: Visit the MEXCFunding Rate History page to view complete historical data.App: From the app homepage, enter Futures, tap the Funding/Countdown section, then select View funding rate history to access historical funding data.Recommended Reading:Futures Trading FAQ: A Complete Beginner's GuideHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC WebTime in Force (TIF) for Futures Trading: A Complete GuideFAQ on Auto-Deleveraging (ADL)FAQ on Index Price, Fair Price, and Last Price
MEXC Futures Loss Coverage FAQ
1. Futures Loss Coverage Voucher Basics1.1 What is a Futures loss coverage?A Futures loss coverage is a form of trading protection offered by MEXC. When you use this voucher for Futures trading and incur a loss, the platform will compensate your loss up to the voucher's coverage limit in the form of a Futures bonus, helping reduce risk and trade with greater confidence.Reminder: Each Futures loss coverage has a maximum compensation amount. Please refer to the information displayed on the voucher you received for the exact amount.1.2 What are the compensation rules?Compensation amount = Your actual realized loss upon closing the position (excluding trading fees)If the loss amount is less than the voucher value, the full actual loss will be compensated.If the loss amount is greater than the voucher value, compensation will be capped at the voucher's maximum face value.Example: Assume you hold a 50 USDT Futures loss coverage. If your realized loss upon closing is 30 USDT, you will receive 30 USDT in compensation. If your realized loss is 80 USDT, you will receive 50 USDT in compensation, which is the maximum value of the voucher.1.3 When will the compensation be credited?Compensation is usually credited automatically immediately after the position is closed. You can check the compensated amount on the voucher in the Voucher Center, and the Futures bonus will be credited directly to your Futures account.1.4 Which order types support the use of Futures loss coverage?SupportedNot supportedLimit OrderTrailing Stop OrderMarket OrderTrigger OrderChase Limit OrderPost OnlyNote: Grid trading and copy trading do not support Futures loss coverage.2. Selecting and Using Futures Loss Coverage2.1 How do I select a Futures loss coverage on the Futures trading page?Follow these steps:Go to the Futures trading page and set your order parameters.During order confirmation, the page will display the Futures loss coverage option.Tap this option to open the voucher selection pop-up.Select the Futures loss coverage you want to use, then confirm the order.2.2 How does the system automatically select a Futures loss coverage ?If you have multiple available Futures loss coverage vouchers, the system will automatically select one based on the following priority:Priority 1: Earliest expiration time
The system will first select the voucher that is closest to expiring.Priority 2: Highest compensation amount
If multiple vouchers share the same expiration time, the system will select the one with the highest compensation limit.Priority 3: Earliest distribution time
If multiple vouchers still qualify, the system will select the one that was distributed earliest.2.3 How can I check whether my current position or order is using a Futures loss coverage?If you have already used Futures loss coverage, you can check it in the following places:Current Positions: The "Loss Coverage Applied" label will be displayed.Open Orders: The "Loss Coverage Applied" label will be displayed.Tap the label to view the detailed usage rules of the Futures loss coverage voucher.2.4 Where can I view my Futures loss coverage?You can view your compensation in Position History or in the Voucher Center.3. Futures Loss Coverage Status and Reminder3.1 Will I receive a reminder before my Futures loss coverage expires?Yes. When there are less than 24 hours remaining before the voucher expires, the system will automatically display a countdown reminder so you can use it in time.3.2 What happens to the Futures loss coverage after I cancel an order?After an order is canceled, the voucher status will automatically revert:If the Futures loss coverage voucher is still within its validity period, its status will return to Unused, and you may continue using it for other orders.If the Futures loss coverage has already expired, its status will change to Expired and it can no longer be used.3.3 Will the system notify me if the Futures loss coverage is expiring when I cancel an order or close a position?Yes. Whether you cancel a single order, cancel all orders with one tap, or close a position with one tap, if the related order used Futures loss coverage and the voucher has less than 24 hours remaining before expiration, including already expired vouchers, the system will display an expiration reminder.Reminder rules: The system will prioritize the voucher that is closest to expiring or has already expired. If there are multiple expired vouchers, the system will display the one with the highest amount. If the amounts are the same, it will display the voucher that was distributed earliest.4. Troubleshooting4.1 Why does my Futures loss coverage show as unavailable?If you hold Futures loss coverage but it shows as unavailable, please check the following:There is an existing position or open order for the current trading pair:
Make sure there is no active position or open order for the trading pair you are currently trading, such as BTCUSDT. Otherwise, the voucher cannot be used.KYC verification is incomplete:
Please make sure you have completed the required Primary or Advanced KYC Verification.The selected order type is not supported:
Please use limit order, market order, chase limit order, or post only. Trailing stop orders and trigger orders do not currently support Futures loss coverage vouchers.A Futures loss coverage is a risk protection tool provided by MEXC for Futures trading. When used properly, it can effectively reduce trading risk. It is recommended that you keep an eye on the voucher's validity period and use it before expiration to make full use of this benefit. For further questions, please contact MEXC Customer Service for assistance.Recommended reading:Usage Instructions for Futures Bonuses, Position Airdrops, and VouchersFAQ on MEXC APR BoosterWhat Is a Copy Trade Bonus?
MEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit Explained
1. MEXC Futures Trading Fee CalculationMEXC Futures trading fees are determined by whether your order is executed as a Maker (limit order) or Taker (market order).FormulasTaker fee = Average fill price × Position size × Contract size × Taker fee rateMaker fee = Average fill price × Position size × Contract size × Maker fee rateExampleAssume you buy 10,000 BTCUSDT contracts as a taker at 30,000 USDT, with a contract size of 0.0001 BTC.Fee = 30,000 × 10,000 × 0.0001 × 0.02% = 6 USDT2. MEXC Futures Funding Fee Calculation and Settlement RulesFunding fees are a mechanism unique to Perpetual Futures that balances holding costs between long and short positions.FormulasFunding fee = Funding rate × Position valuePosition value = Fair price × Number of contracts × Contract sizeWhether funding is paid or received depends on two factors: the funding rate (positive or negative) and your position direction (long or short). When the funding rate is positive, longs pay shorts. When the funding rate is negative, shorts pay longs. At settlement, position value is calculated using the current fair price.ExampleYou hold 10,000 BTCUSDT long contracts. The current fair price is 30,000 USDT, and the funding rate is +0.01%. Funding fee is then calculated as 30,000 × 10,000 × 0.0001 × 0.01% = 3 USDT (paid)If the funding rate is –0.01%, you will receive 3 USDT.3. MEXC Futures Closing PNL CalculationTotal realized PNL = Closing PNL + Funding fees − Opening fee − Closing fee3.1 USDT-Margined Futures Closing PNLLong closing PNL = (Closing price − Average entry price) × Position size × Contract sizeShort closing PNL = (Average entry price − Closing price) × Position size × Contract sizeExampleYou open 5,000 BTCUSDT long contracts at 28,000 USDT and close at 30,000 USDT.Closing PNL = (30,000 − 28,000) × 5,000 × 0.0001 = 1,000 USDT3.2 Coin-Margined Futures Closing PNLLong closing PNL = (1 / Average entry price − 1 / Closing price) × Position size × Contract valueShort closing PNL = (1 / Closing price − 1 / Average entry price) × Position size × Contract valueExampleYou open 100 BTC coin-margined contracts (contract value 100 USD) at 30,000 USDT and close at 33,000 USDT.Closing PNL = (1/30,000 − 1/33,000) × 100 × 100 = 0.0303 BTC4. MEXC Futures Unrealized PNLUnrealized PNL reflects the current unrealized profit or loss of an open position. It is calculated using the fair price, not the last traded price.4.1 USDT-Margined Unrealized PNLLong unrealizedPNL = (Fair price − Average entry price) × Position size × Contract sizeShort unrealizedPNL = (Average entry price − Fair price) × Position size × Contract size4.2 Coin-Margined UnrealizedPNLLong unrealizedPNL = (1 / Average entry price − 1 / Fair price) × Position size × Contract valueShort unrealizedPNL = (1 / Fair price − 1 / Average entry price) × Position size × Contract valueExampleYou hold 8,000 ETHUSDT long contracts, entry price 2,000 USDT, fair price 2,200 USDT, contract size 0.01 ETH.Unrealized PNL = (2200 − 2000) × 8000 × 0.01 = 16,000 USDT5. MEXC Futures ROI and Margin CalculationUnderstanding ROI and margin helps you better evaluate trading performance and manage risk.ROI= PNL / Initial marginInitial margin= Position value × Initial margin rateInitial margin rate= 1 / LeverageExampleYou open a position with 10× leverage, with a position value of 10,000 USDT.Initial margin rate = 1 / 10 = 10% Initial margin = 10,000 × 10% = 1,000 USDTIf profit = 500 USDT, ROI = 500 / 1000 = 50%6. MEXC Futures Bankruptcy Price CalculationThe bankruptcy price is the price at which the position margin is fully lost.Long bankruptcy price = (Position value − Position margin) / (Position size × Contract size)Short bankruptcy price = (Position value + Position margin) / (Position size × Contract size)ExampleYou hold 10,000 BTCUSDT long contracts.Position value = 3,000 USDTPosition margin = 300 USDTContract size = 0.0001Bankruptcy price = (3000 − 300) / (10,000 × 0.0001) = 2,700 USDT7. Full Futures PNL Calculation ExampleAssume a user opens a long position of 10,000 BTCUSDT perpetual contracts at 7,000 USDT as a taker. The taker fee rate is 0.02%, maker fee rate is 0%, funding rate is −0.025% (long receives), fair price is 7,000 USDT, and contract size is 0.0001 BTC.The opening fee is: 7000 × 10000 × 0.0001 × 0.02% = 1.4 USDTThe funding fee is: 7000 × 10000 × 0.0001 × (−0.025%) = −1.75 USDT (received)Assume the user closes the position at 8,000 USDT(taker). The closing PNL is: (8000 − 7000) × 10000 × 0.0001 = 1000 USDTThe closing fee is: 8000 × 10000 × 0.0001 × 0.02% = 1.6 USDTTherefore, the total realized PNL is: 1000 + 1.75 − 1.4 − 1.6 = 998.75 USDT8. MEXC Maximum Contracts CalculationBefore opening a position, understanding how to calculate the maximum number of contracts helps you plan position size more effectively.8.1 USDT-Margined Futures Maximum ContractsMaximum contracts = Initial margin × Leverage / Contract size / Entry priceExampleYou have 1,000 USDT margin, use 20× leverage, entry price 30,000 USDT, contract size 0.0001.Maximum contracts = 1000 × 20 / 0.0001 / 30000 = 6,666.67 contracts8.2 Coin-Margined Futures Maximum ContractsMaximum contracts = Order cost × Leverage × Average entry price / Contract valueExampleYou have 0.1 BTC margin, use 10× leverage, entry price 30,000 USDT, contract value 100 USD.Maximum contracts = 0.1 × 10 × 30000 / 100 = 300 contracts9. MEXC Average Entry Price Calculation (After Adding to a Position)When you add to an existing position, the average entry price must be recalculated.9.1 USDT-Margined Futures Average Entry PriceNew average entry price = (Original average price × Original position size + New entry price × New position size) / (Original position size + New position size)ExampleYour original position is 5,000 long contracts at 29,000 USDT.Add 3,000 contracts at 31,000 USDTNew average price = (29000 × 5000 + 31000 × 3000) / (5000 + 3000) = 29,750 USDT9.2 Coin-Margined Futures Average Entry PriceNew average entry price = (Original position size + New position size) / (Original position size / Original average price + New position size / New entry price)Example
Your original position is 100 contracts at 30,000 USDT.Add 50 contracts at 32,000 USDTNew average price = (100 + 50) / (100 / 30000 + 50 / 32000) = 30,638.3 USDT10. MEXC USDT-Margined Contract Unit ConversionThe following examples assume a contract size of 0.0001.ScenarioFormulaExampleContracts → USDTUSDT = Position size × Contract size × Current priceGiven: Position size = 23,405; Current Price = 27,076.2 USDT = 23,405 × 0.0001 × 27,076.2 = 63,371.8461 USDTUSDT → ContractsContracts = Position value / Current price / Contract sizeGiven: Position value = 63,371.8461 USDT; Current Price = 27,076.2Position size (Contracts) = 63,371.8461 / 27,076.2 / 0.0001 = 23,405Contracts → CoinCoin amount = Position size × Contract sizeGiven: Position size = 183Coin amount = 183 × 0.0001 = 0.0183 BTCCoin → ContractsPosition size = Coin amount / Contract sizeGiven: Coin amount = 0.0183 BTCPosition size (Contracts) = 0.0183 / 0.0001 = 18311. MEXC Coin-Margined Contract Unit ConversionThe following example assumes a contract value of 10 ETH.ScenarioFormulaExampleCoin amount → ContractsPosition size = Coin amount × Current Price / Contract valueGiven: Coin amount = 0.19 ETH; Current Price = 3,100 USDTPosition size = 0.19 × 3100 / 10 = 58.9 contracts12. MEXC Futures Account Asset CalculationUnderstanding how account assets are calculated helps you manage funds and control risk more effectively.Wallet balance = Bonus balance + Net transfers + Realized PNLAvailable balance = Wallet balance − Position margin − Order marginAvailable margin is calculated differently depending on whether auto-margin addition is supported:If not supported: Available margin = Available balance − Unrealized lossIf supported: Available margin = Available balance + Unrealized PNLExample
Your wallet balance is 5,000 USDT, position margin is 2,000 USDT, order margin is 500 USDT, and the current unrealized profit is 300 USDT. If auto-margin addition is supported:Available margin = (5000 − 2000 − 500) + 300 = 2,800 USDT.Recommended Readings:MEXC Margin Calculation Guide: Initial Margin, Maintenance Margin, and Liquidation Price ExplainedHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC WebMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesFutures Trading Page Terminology Guide
Using Spot and Flexible Savings Assets to Open Futures Positions FAQ
1. Feature 1.1 What is the feature for opening futures positions using spot and Flexible Savings assets?This feature is a fund management tool introduced by MEXC. When the available balance in your Futures account is not sufficient to open a position, the system can automatically use assets from your Spot account or Flexible Savings account to cover the required margin and execute the order.The purpose of this feature is to simplify fund allocation and improve efficiency when trading Futures. At present, only Flexible Savings assets can be used to open Futures positions on the web platform. Support for using spot assets and the mobile app will be available soon.1.2 Is there an extra fee for using this feature?No. There are no additional fees for using this feature.2. Assets2.1 Why does my available balance not increase immediately after selecting spot or Flexible Savings assets?In cross margin mode, unrealized losses from existing positions may occupy available funds. After selecting Spot or Flexible Savings assets, the additional funds are first used to offset this occupied margin. As a result, the available balance may not increase, or the increase may be smaller than the selected amount.2.2 If liquidation occurs, will my spot or Flexible Savings assets be affected?No. This feature is only used as a funding source when opening positions or adding margin. Futures liquidation does not affect your Spot assets or Flexible Savings assets. This means that even if liquidation occurs, assets held in your Spot account and Flexible Savings account remain safe.2.3 What happens if my Spot or Flexible Savings balance is not enough?If the selected account does not have enough available assets to fully cover the required margin, or if the assets do not meet redemption or transfer conditions, the order may fail. In this case, the system will display an error message. You are advised to check the asset status of each account and make adjustments as needed.3. Opening Futures Positions 3.1 How do I enable the use of Spot and Flexible Savings assets for Futures trading?After entering the MEXC Futures trading page, click Available in the order section and select the accounts you want to use as funding sources, including your Spot account and Flexible Savings account. Once selected, the system will automatically draw assets from these accounts when additional funds are required to place an order.3.2 Do trigger orders and trailing stop orders support this feature?No. Trigger orders and trailing stop orders do not currently support this feature. If you use these order types, you must ensure that your Futures account has sufficient available funds, or manually transfer assets before placing the order.3.3 Can this feature be used in multi-asset margin mode?No. This feature is not supported in multi-asset mode. If multi-asset margin mode is currently enabled, you must switch to another margin mode before using this feature.4. Handling Order Failures4.1 If an order fails, will redeemed or transferred assets be returned automatically?No. If an order fails, the system will not automatically return redeemed or transferred assets to your Spot account, nor will it restake Flexible Savings assets. After an order failure, you should go to the Assets page to check your fund distribution and manually handle the funds if necessary, such as re-staking to Flexible Savings or transferring assets back to the original account.4.2 Why can an order still fail after selecting spot or Flexible Savings assets?Orders may fail for several reasons. Common causes include assets in the Spot or Flexible Savings account not meeting redemption or transfer conditions, transfer limits being reached, system processing issues, or increased order costs caused by market volatility. If an order fails, you are advised to check the asset status and account limits, or contact MEXC Customer Service for assistance.4.3 What happens if redemption or transfer fails during order placement?If redemption or transfer fails during the order process, the order cannot be successfully submitted. The system will display an error message. Common reasons include insufficient balance, locked assets, or exceeded transfer limits.5. Using Spot and Flexible Savings Assets to Add Margin in Isolated Mode5.1 Can I use Spot or Flexible Savings assets to add margin to isolated positions?Yes. In addition to opening positions, this feature also supports adding margin to isolated margin positions. When you need to add margin to an isolated position, you can select your Spot or Flexible Savings account as the funding source. The system will automatically complete redemption and transfer.5.2 How do I add margin using Spot or Flexible Savings assets?In the position list, select the isolated position you want to adjust and click the pencil icon next to Margin. In the Modify Margin window, click Max Addable, then select your Spot account or Flexible Savings account. Enter the margin amount you want to add and confirm. The system will complete the process automatically.6. Usage Recommendations6.1 Who is this feature suitable for?This feature is well suited for users who prefer to keep funds in their Spot or Flexible Savings accounts to earn interest, while still being able to respond quickly when trading opportunities arise. It is especially useful for users who frequently transfer funds between accounts or regularly add margin to isolated positions.6.2 What should I be aware of before using this feature?Before using this feature, you should confirm that assets in your Spot and Flexible Savings accounts meet redemption and transfer requirements, understand any applicable limits, make sure multi-asset margin mode is not enabled, and confirm that you are not using trigger or trailing stop orders. Fully understanding the rules of this feature can help you avoid order failures.Disclaimer: Crypto asset prices are highly volatile, and futures trading carries high risk. This content is provided solely for feature instructions and frequently asked questions and does not constitute investment advice. Please proceed with caution after fully understanding the relevant risks.Recommended Reading:How to Open Futures Positions Using Spot and Flexible Savings Assets